Technical Information
Here you will find videos and documentation related to how to install, bend or work with our resin panels or face materials.
​
If you require any more information regarding our products, please feel free to contact at any moment.
Binding Application Method
In the following video we will explain the binding application method step by step for an easy understanding and to avoid mistakes while installing our face material.
Binding Application Method
Curved Resin Application Method
Our face material can be easily shaped and curved depending on the requirements of each project (columns, curved walls, etc). In the video down below we will explain step by step how to achieve such results without damaging the material and ensuring that the face material stays on shape.
Curved Resin Application Method
General Information
1.1. Trademark: Aidan Renee International
​
1.2. Pre-fabricated resin sheet or panel.
​
1.3. Temperature limits: For wall panels 5C° - 65C°. (Interior only)
​
1.4. Recommended Uses partition, atrium wall, backlit wall, feature wall, door, decorative panel, tabletop, counter front, kitchen door, showcase, backdrop, drawer front and cabinet door.
​
1.5. Face Material: -
95%: Resin
5%: Color Mixture & Shell Extract
​
1.6. Face Thickness:1.2 – 2.8mm in different models.
​
1.7. Self-Extinguish: BS476-Part VII Class 1 & Class 2.
​
1.8. Size: 1150 x 2350mm (1150 x 2950mm upon request)
​
1.9. Weight: 1.5 - 3kg per square meter without backing.
(weight of backing board is available upon request.)
​
1.10. Backing Material: MDF, FR-MDF, WR-MDF, Aluminum Honeycomb Board, etc.
​
1.11. Cold-hot cycle test: 5 times without visual effect.
​
1.12. Surface Hardness: 3-4H
​
1.13. Water Absorption: 0.2%
​
1.14. 2.8mm thick irregular pattern and color produced by various molding technology – panel color and pattern are changed irregularly and gently like stone and wood. The surface will appear different shades, tones, pore and art glass finish / orange skin.
​
1.15. Curving: Use the industrial-grade heat gun, the minimum radius is 50mm (For more information, please watch our installation videos)
​
1.16. Boiling Water Test: No visual change after 1 hour.
​
1.17. Colour mixed in resin complies with the soluble heavy metal requirement stated in European standard EN 71 Part 3:1994 + A1:2000/AC:2002.
(Note: EN71:1994 +A1:2000, BS EN71: 1995 and BS5665:1995 are identical.)